Offer Dive Suit Scubaforce X9 "Wreck Edition" XL
Contrary to the standard version, the suit is completely made of robust 1200 Cordua + built-in balanced PeeValve. VHB 650,-EUR
Further information from the manufacturer about the suit:
A diagonal front zipper combined with a telescopic torso offers the X9 the best freedom of movement with an optimal fit.
The seams are hand-sealed in a complex sealing process. Sealing – a polyurethane-based adhesive forms a permanent bond with the trilaminate and is much more durable than conventional seals via tapes.
The X9 is made of a material mix of robust 1200 Cordura in the leg area and the lightweight 840' trilaminate in the upper body. Thus, the "sociable" leg area is excellently protected and the suit still offers an enormous freedom of movement thanks to the softer material in the upper body. The nylon is protected by a Cordura Protection Overlay. This not only covers large parts of the shoulders and arms, but also includes the protective zipper for the dry zip.
In order to achieve even better freedom of movement, the X9 Movement has zones in the armpit and crotch area. These elipse-shaped inserts reduce the clamping forces on the seams to such an extent that a valve drill is child's play.
The X9 also offers an unusually good design for the seam guidance in the crotch area: There is no crossing seam! Thus, the load in this area is significantly reduced.
A firmly mounted solid suspender system ensures an ideal fit. Two leg pockets with Velcro are of course available as standard.
The standard equipment of the X9 also includes the XBP bags. The XBP is a large-volume suit pocket, with a separate inner compartment for wetnotes and a reinforcement in the grip area for easy opening and closing.
Scubaforce also pays attention to the highest quality when selecting components. Inlet and outlet valves from Apeks, dry zips from YKK, trilaminate from European production.
Features of the standard equipment at a glance
- Trilaminate dry suit with front zip
- Telescopic torso
- solid braces system
- YKK (Dynat / BDM) Dry zip
- large heat collar
- 2 XBP below pockets with 2 loops each and Velcro fastener
- Apeks valves (inlet 340 degree rotatable, high profile outlet valve)
- Dry boot boots with fin band stoppers
Suit has recently received Revision Workstation Service GmbH (leak test, new DUI holding sleeve, arm cuffs).
Further information from the manufacturer about the suit:
A diagonal front zipper combined with a telescopic torso offers the X9 the best freedom of movement with an optimal fit.
The seams are hand-sealed in a complex sealing process. Sealing – a polyurethane-based adhesive forms a permanent bond with the trilaminate and is much more durable than conventional seals via tapes.
The X9 is made of a material mix of robust 1200 Cordura in the leg area and the lightweight 840' trilaminate in the upper body. Thus, the "sociable" leg area is excellently protected and the suit still offers an enormous freedom of movement thanks to the softer material in the upper body. The nylon is protected by a Cordura Protection Overlay. This not only covers large parts of the shoulders and arms, but also includes the protective zipper for the dry zip.
In order to achieve even better freedom of movement, the X9 Movement has zones in the armpit and crotch area. These elipse-shaped inserts reduce the clamping forces on the seams to such an extent that a valve drill is child's play.
The X9 also offers an unusually good design for the seam guidance in the crotch area: There is no crossing seam! Thus, the load in this area is significantly reduced.
A firmly mounted solid suspender system ensures an ideal fit. Two leg pockets with Velcro are of course available as standard.
The standard equipment of the X9 also includes the XBP bags. The XBP is a large-volume suit pocket, with a separate inner compartment for wetnotes and a reinforcement in the grip area for easy opening and closing.
Scubaforce also pays attention to the highest quality when selecting components. Inlet and outlet valves from Apeks, dry zips from YKK, trilaminate from European production.
Features of the standard equipment at a glance
- Trilaminate dry suit with front zip
- Telescopic torso
- solid braces system
- YKK (Dynat / BDM) Dry zip
- large heat collar
- 2 XBP below pockets with 2 loops each and Velcro fastener
- Apeks valves (inlet 340 degree rotatable, high profile outlet valve)
- Dry boot boots with fin band stoppers
Suit has recently received Revision Workstation Service GmbH (leak test, new DUI holding sleeve, arm cuffs).
Berlin