Offer a new and unused Suex all-purpose mount.
Price: 150EUR
I am happy to answer any questions you may have.
Warendorf
Offer a new and unused Suex all-purpose mount.
Price: 150EUR
I am happy to answer any questions you may have.
Warendorf
Since May 2020: approx. 35 TGs, 40 operating hours, 15 full charge cyles
Battery in perfect condition, only stored at room temperature between 40 and 80% charge
Always well maintained (rinsed with fresh water, shaft and sealing rings greased, etc.)
The aluminum tube has several utility flaws,
Shroud and propeller are without damage.
A non-slip, robust 3D print is attached to the speed controller, making it easier to operate with thick dry gloves.
Original accessories:
Pull rope (not original)
Tow rope (not original)
Single handle and double handle
Charger
Case with trim weights, salt water weight, care products, etc.
Clamp with handle for mounting on the scooter
2x Harness
Operating instructions
Original
VB 4.400EUR
The goods are sold under exclusion of any warranty.
I prefer self-collection with function test, then cash payment,
Shipping costs with transport insurance 50EUR
Payment via PayPal friends or bank transfer.
I ship quickly and reliably.
90542 Eckental
Bracket for Original Eezycut Harrness Version ... But should also fit with replicas ... One-handed conditions for scooters ... Always at your fingertips ...
Watch the video 😃
https://youtu.be/v99WzATZZMw?si=MtS81K3fYIqID6Xw
Eezycuter is not part of the delivery. Supplied is a holder with the required fastening material ...
Have a look at my other ads...
Recklinghausen
Sell here a universal compass mount for the Suex VR VRX XJS XJ37 ... or Divertuge or Carbon Scooter... suitable for the Silva c58 ... the compass has 2 adjustable axes whereby the compass can be adjusted very well to the magnetic field of the scooter...
Price 50EUR
If you have a small surcharge of 10EUR, a V2A Stage clamp which is covered with fabric tape can be purchased ...
The compass is not part of this offer ...
The holder is an in-house development and comes from a 3D printer ...
If you are interested, just contact us ...
Tel.. +491725330952
Recklinghausen
I sell my XK1 with bypass, proplock, 2nd retractable handle, 2-stage trigger, charger (with 3 charging stages for battery care 50% - 90% - 100%). All seals new, battery burn test at approx. 90%. Saltwater trimweights, soft grip.
The scooter has experienced about 300TG. The scooter is in really good condition, of course you can see a few signs of use.
Pick up or drop off would be the best.
Price: 3300.-EUR
Stuttgart
Suex Actioncam Gopro Mount
Price 40EUR
The bracket attaches to the front of the trigger...
For this, 2 holes have to be drilled... And then sunk it... So that the screws don't get in the way...
The camera can be rotated 360° on the mount and can be adjusted in any position...
Bracket comes with all the screw you need... Incl. the inch screw for the camera... All screws in VA2
The bracket is an in-house development and comes from a 3D printer ...
Recklinghausen
Sell here a compass mount for the Suex VR and XJS ...
Price 50EUR
Suitable for the Silva c58 ... the compass has 2 adjustable axes which allows the compass to be adjusted very well to the magnetic field of the scooter...
The compass is not part of this offer ...
In this video everything necessary is explained...
https://youtu.be/GkMAygNgFo4
The holder is an in-house development and comes from a 3D printer ...
Dive this mount on my VR for 2 years without any problems...
If you are interested, just contact us ...
Recklinghausen
Sell here a compass actioncam mount for the Suex VR and XJS...
Price 60EUR
Suitable for the Silva c58 ... the compass has 2 adjustable axes where the compass can be adjusted very well to the magnetic field of the scooter...
The compass is not part of this offer ...
New on this mount is the recording for the action cam Gopro or the same
The bracket comes with all the necessary screws... Incl. The inch screw for the camera... All screws in VA2
Either the compass or an action cam can be mounted...
The holder is an in-house development and comes from a 3D printer ...
If you are interested, just contact us ...
Recklinghausen
Suex holder for depth gauge...
Price 40EUR
Bracket has been specially developed for the Uwatec/Scubapro Digital Bottomtimer 330m...
It is individually adjustable from the angle of inclination... So that a good readability is guaranteed for everyone...
Bracket fits any Suex model that has the T-Fix mount...
The holder is manufactured by us with the 3D printer...
The bottom timer is simply clicked into the holder ... Bracket can be mounted both left and right ... Please decide in advance whether left or right... When changing the bottemtimer, the outer ring of the bracket must be destroyed ... In this case, please contact me ...
Delivery without bottemtimer...
Only the bracket is supplied...
Recklinghausen
Sale due to new purchase my Suex XK1 BJ 2019.
Original price 7590EUR Speed 100m/min depth 200m range 14,8km runtime 330min Range at full speed 8.1km Nominal battery capacity 1340Wh Battery capacity was 94% in 01/2021. Has always been stored at 60 - 80% state of charge. Weight without battery 17kg. Infinitely variable speed regulation for optimal speed adjustment. incl. charger + case, saltwater lead, belt handle. Pick-up/visit to the Bamberg/Munich/Leizpig region. Transport to NRW,HH,Berlin,Stuttgart,Bodensee possible. Shipping possibleMax speed 85m/min. Battery was 05/2021 at 92%. Has always been stored at 60 - 80% state of charge.
Weight without battery 17kg. Infinitely variable speed regulation for optimal speed adjustment.
incl. bypass, charger, belt handle.
Pick-up/visit to the Bamberg/Munich/Leizpig region. Transport to NRW,HH,Berlin,Stuttgart,Bodensee possible. Shipping possible
Price VHB
Sell Suex scooter adv 20/42 and an adv 20 plus batteries, plus chargers and storage bracket... and an Ersats Tube converted.... both with problog, batteries very well maintained few sunden only in the water ... and also only in fresh water ... also have trim lead if you are interested just write or we make phone calls ... have fun browsing 1950 euro
Varel
The original rotary switch of the Suex scooter is poor and difficult to operate. Especially in winter, it makes problems to turn the rotary switch with the thick gloves. With my tool, this is over quite quickly. Simply plug it in (without tools) and it's very easy. Since the switch position itself is difficult to see above water, (white hole in white material) the switching positions are very easy to recognize on my rotary switches.
suitable for:
Suex XJVR
Suex XJoy 7
10EUR / pcs plus shipping
Suex Zeuxo 20
YOC 2015/16
The Suex Zeuxo 20 was in the water about 7 times
The Zeuxo series is only produced on request.
Zeuxo 20 is equipped with a short tube. This makes your turning circle very small, which is a great advantage in tight spaces. The thick tube displaces a lot of water and acts like a tractor.The Zeuxo 20 can be used very well as a main scooter but also as a backup scooter. As a battery, the Zeuxo 20 has a lead gel battery. A reliable and solid underwater scooter.
Where : Water weights, battery/charger and leash/boltsnap In addition, the Zeuxo 20 has a PropLock propeller system, a Suex N Handle and an Add Handle
I am happy to answer questions via WhatsApp 0172/6600455
3200 VB
Berlin
Stuttgart
Berlin
Jena
Gernsheim
Berlin
Iffezheim
Sendenhorst
Bielefeld
Bielefeld
Baden-Württemberg
90445
Buxtehude
Sendenhorst
Bielefeld