Classified ads Rebreather

Offer here a Hollis Prism2 rebreather in good condition and with about 100 hours. The oxygen sensors would have to be replaced.

Price: 5000 Euro FP.

Wiesbaden

Sell my Hollis Explorer SCR Rebreather.

The O2 cells were replaced at the beginning of the year. The display has already been renewed and converted to the better one, battery was also replaced in 2021. Device works perfectly.

Bottle also included, but without TÜV. Currently filled with EAN40. So you can start right away ;-) I can also add lime.

Feel free to write if you have any questions.

Price VHB 1000EUR

Magdeburg

Little used rebreather from JJ-CCR in top condition. Sold without O2 sensors, otherwise the device is in submersible condition. Incl. replacement seals. If desired, a stage and a OMS wing can be added, which is more suitable for sea diving. Sold because of hobby abandonment.

EUR 4500.-

Viewing and pick-up in Switzerland, 3182 Ueberstorf

Phone +41 79 300 03 16

The pscr comes with cooper hoses, golem shrimp, 2 different rings (stainless stell or plastic) for the carbon stand (so you can balance your rig perfectly) there are 2 sets of lungs, rubber or hyperlon there are spare fine sieves (special laser cuttet), there is also a sieve for the flutter valve (also laser cuttet). it comes also with a complete spare o-ring set (also for the golem bov). the double 12 frame has nearly new lola-valves (and 2 revisionkitts). the swichtblock is the small compact version.

Hello everyone, offer a few of my things, if there is interest, report then also like to send pictures of the affected article

apeks-100-regulators/2846613675-230-7009"> diving set double 12 with 2 x Apeks 100 regulators 1200 Euro

Mixed Gas Rebreather Habanero RB 80 Passive Semi-Closed 950 Euro

Excalibur 2 best underwater detector 1250 euros

Aquazepp Scooter Diving Scooter Reliably Tested 500 Euro

Oberfranken

Extensive Filling Line for Sale with TMX Filling Panel Against Bid
Description:
Becker und Söhne Kompressors (JAB):
• Model: Slow runner with direct drive
• Operating condition: Excellent, with about 400 hours of use and low usage
• Levels: 4-stage compression
• Air capacity: 500 litres per minute
• Pressure range: Currently set to 300 bar,
Star-delta start-up system (control box is included)
• Construction: Mounted on a sturdy frame
Filtration:
• Primary filter: 1x P 61 filter
• Secondary filter: 1x double filter L&W (Nitrox clean)
Filling system:
• High-pressure filling bar: For 300 bar, including pressure reducer to 220 bar, equipped with 4 rocker arms, hose and connection (note: pressure gauges should be replaced)
• High-pressure filling bar: For 220 bar with 4 rocker arm valves
Storage:
• Storage bottles: 6x 300 bar,
• Solenoid valve: For switching between accumulator and compressor
• Manifold: For cylinder connections with 6x 300 bar connections
• Piping: Approx. 6 meters 8 mm stainless steel pipe, approx. 50 meters 6
mm Stainless Steel Pipe
• Various boxes with spare parts, connectors, hoses, etc.
TMX Equipment:
• TMX Filling Panel: With connectors for 4x O2, 2x helium, 1x air and 2 outputs, expandable for additional inputs
• Display: 1x digital display
• Wall connection strip (8 inputs) for the O2/HE bottles
• 7x 50 litre 300 storage cylinders (O2, argon, helium), 2x 33 litre storage cylinders (O2/argon), 1 x 50 l 200 bar air
I help with the dismantling and give an explanation of everything

Location and condition:
• Location: The plant is located in Castrop-Rauxel (near Dortmund) and must be dismantled there.
Important note on commissioning:
Before the first use, it is essential that the system undergoes extensive cleaning, maintenance and repair to ensure optimal performance and safety.

Sale without warranty or possibility of return.

There are other various diving gear for sale:
1 x Maximator Booster
Some scuba tanks
SF1 Rebreather
Gevin Replica Scooter

Castrop-Rauxel

420EUR incl. shipping within Germany.

I'm selling a high-quality ScubaForce heads-up display (HUD) that I bought new from a friend who bought on a new SF2 around 07/2023.

The HUD was only used by me for two dives at the indoor dive center and worked perfectly. Used it with my T-Reb CCR. But since I have now changed my mind and will switch to the expensive nerd, I offer this HUD for sale.

Technical information:

• HeadUpDisplay (HUD) for Rebreathers
• Manufacturer: ScubaForce
• Condition: No signs of wear (only 2 dives in the indoor dive center)
• Function: Flawless

It is perfect for technical divers and offers an intuitive display during the dive. For more detailed specifications, simply google SF2 HUD.

Costs new 500EUR.

If you are interested or have any questions, please feel free to contact me.

Note: This is a private sale. No warranty or returns.

LG; Adrian

Just give us a call or send us an e-mail: 01627547945 / adrian.reuter@gmx.de

LED Signal Transmitter - Head Up Display (HUD)

suitable for all dive computers with standard Fischer connector (e.g. Shearwater Petrel)

Optical PPO2 Monitoring / Warning for Rebreathers

suitable for all dive computers with Fischer connector in standard PIN assignment,
e.g. Shearwater Petrel "

I sell a Donut Wing from DirZone for the big cutlery: D12 to D20 with 23l buoyancy, corresponds to about 50lbs (or at the top). It is the stable version, not the lighter "travel" variant.

Very good general condition, it was still diving until the end of the year.
Since I dipped it on the rebreather, four slots are cut in the middle as hose grommets and a bungee loop is built in on the right.
Tight, holds the air and the inflator also does what it is supposed to. Of course, an overhaul doesn't hurt with second-hand purchases...

New price in common online shops not less than 350EUR.
200EUR plus shipping costs

I cannot offer a warranty or return.

Bodensee

Bottles for sale

No TüV, because self-filler

BCE 0,85 l 90Euro

BC cylinder 1.5 l95 Euro

Rebreather cylinder 3 l 300 bar 175 Euro

Shipping is also added

Bottles are little used

Raum: HD/KA

I bought the Bauer k14 compressor 2014 overhauled from the Bauer service partner. At that time, the compressor was restocked, overhauled and equipped with the P61 filter system. The compressor has a 300 bar filling bar.

The compressor was serviced 1x a year. The last maintenance was done in 09/2023 at the Bauer Service Partner. During this service, among other things, the oil, the P61 filter element and the blow-off filter of the oil separator were replaced. A service report will be included with the purchase.

No defects were found during the last maintenance 09/2023.

The compressor has been running 400 BH since the general overhaul. The compressor currently delivers 190l and the pressure relief valve responds at 310 bar when not in automatic mode.

The compressor has a 16 amp plug and runs on a RCD with "C" inertia.

For this purpose, I had bought the Nitrox easyJet system at that time. Of course, this can also be used for larger compressors. All you have to do is use a larger pressure reducer.

I also bought the 2x 50l 300 bar storage bottles new at that time. These received a new TÜV in December 2022.

I had the compressor in a shelf niche until the last maintenance. The compressor is very manoeuvrable with its 3 wheels.

The storage bottles were always "next to" the aisle.

The storage bottles are filled by the compressor.

A pressure reducer from Bauer with a safety valve connected behind it allows 210 bar bottles to be filled directly from the compressor or the storage cylinders.

I always filled my two double 12 + the stage + the storage bottles and then did some fillings just out of the storage bottles.

The compressor always ran for several hours at a time. No short-term operation.

It is sold because I have now switched to rebreathers.

Location 59368 Werne

Price 8000 Euro for self-collection. Wheel loader for loading is available.

Hello

Sell my acid-compatible lubricant Christolube MCG 111 for maintenance work on the rebreather, booster, cylinder valves and regulator. It's still full and I don't need it anymore.

Price: 18 Euro

Ruhrgebiet/ Münsterland

Rebreather white arrow

Engen

Used DiveButler - 390,- Euro - self-collector

It is with a heavy heart that I part with my used original DiveButler. From my point of view, the DiveButler is the best "pensioner's ladder", because you can simply pull or push the device on the butler to the dive site to simply set up the buttler and bottle in a way that is easy on your back :-)

I have always used the DiveButler with a D10/300. I switched to a rebreather (JJ-CCR), so unfortunately I no longer have a need for the beautiful part.

More information and the complete function overview can also be found at www.divebutler.at

Fixed price: 390 Euro

!!! No shipping !! only self-collectors (Neckarwestheim)

Stuttgart

I have an SF2 Head-Up Display for sale, and it's in excellent condition!

This HUD is an essential tool for any technical diver, it provides optical monitoring and warnings of the partial pressure of oxygen (PPO2). It is compatible with all dive computers with a standard PIN Fischer connector, making it a versatile choice for a wide range of closed circuit rebreather (CCR) devices. As a bonus, it uses the DiveCAN protocol, which further increases its compatibility with other CCR devices.

I've had this HUD for about 9 months and have tested it extensively in numerous dive scenarios. It has never let me down. Its LED signaling device is undamaged and works perfectly.

The reason for the sale? I recently upgraded to a Shearwater Petrel. As a colorblind diver, I found the Petrel's display to work better for me. But if you don't have such limitations, you'll find the SF2 HUD to be a robust and reliable partner in your underwater explorations.

Please note that the HUD does not come with any additional accessories and its original packaging. But rest assured, it has been well cared for and maintained to ensure it is as good as new.

Negotiation basis: 430EUR

Given the excellent condition of this HUD and its current market value of around $540, I believe that 430EUR is a fair price for this well-maintained used unit.

Have fun diving!

Darmstadt

I sell my SF 2 prototype MCCR here.

This is a prototype. It was one of the few predecessors of the current SF2 with a special head which was not glued but sealed with additional O-rings.

The rebreather is in good condition, ready to dive, absolutely tight and fully functional. The sensors have been replaced in the last 2 months. In addition, 3 more oxygen sensors in their original packaging are added. The rebreather is sold with a Shearwater Predator and is therefore ready to dive.

All hoses have been replaced by MiFlex hoses. As well as all O-rings and small parts replaced.

The rebreather has a CMF (Constant Mass Flow) from TecMe on the oxygen side which is fixed to a flow of 0.5 L per minute. In addition, a Manuel Gas Add from TecMe was installed on the Dilluent side for security reasons.

The BOV is from Golem Gear Shrimp which not only closes the rebreather.

The first two stages are APEKS Tek 3 oxygen-pure.

On the backplate are mounted 2 bungee ropes and a buttplate for carrying the stage bottles. As a result, the stage bottles come further back and you have more armroom

Nautec valves are installed on the 3 liter compressed air cylinders and still have TÜV until 01/23.

Accessories such as O-rings and batteries for the dive computer are part of the offer.

Price: 2400 EUR VB

Pick up only!

It is a private sale without guarantee, warranty or possibility of return.

The sale takes place under exclusion of any liability for material defects.

Chestmount rebreather adapter for the diving tank New!

Price incl shipping 70EUR

Offer a new (probably unmerged), very rare and complete

CCR Rebreather which among others from the ital. Combat swimmers are used:

Type: O.M.G. Caimano MK2

(the O2 bottle currently has no TüV - but was stored filled)

The diving device absolutely requires appropriate diving training / or experience with CCR rebreathers!

( Model O.M.G. (formerly A.R.O.) Caimano is a super-light, quiet & compact, bubble-free diving device - purely manual operation - no const. Flow or lung automaton.)

For more information, please consult the Internet.

Price: 2999,- EUR

Please only pick up in NRW/ Münsterland

private sale; no guarantee, warranty or return.

Münsterland

Offer jjccr backplate with straps. Brand-new. 150EUR

I offer at a fixed price 100,00 EUR:

Mono immersion cylinder valves for 230 bar compressed air are the simplest variant of valves used in immersion technology, which makes them widely available. They are usually used on smaller bottles or on aluminum bottles. Your service effort is also very low because only a few components and sealing elements are required

Here I offer a mono diving cylinder valve for 230bar for left and right. In combination, these valves are especially intended for sidemount diving and use in recirculation devices / rebreathers.

Diving cylinder valves for 230bar are tested with 300-350bar pressure.

Technical specifications of the 230bar immersion cylinder valve

• Right and left monovalve compressed air 230 bar
• for bottles with M25x2mm bottle neck thread
• Production according to EN-144
• Connection thread G5/8" female thread 200bar
• black rubber handwheel, does not match handwheel in blast sketch!
• not expandable with a second exit
• Riser tube and O-ring included
• Manufacturer Part Number: BA-HTD10137
• EAN: 4250605461652

Shipping with Hermes parcel + 4.90EUR

Mettmann

HAVE 5LIETER NEITROX BOTTLES WITH DRAEGER DOUBLE VENTIEL FROM THE DOLPHIN REBREATHER IN BW SUITCASE TO GIVE AWAY

SZ

Search Contact to Rebreather divers or Rebreather interested in the area Flensburg - Kiel.

Flensburger Förde

Offer the Nitrox unit of Russian rebreather IDA71u as well as accessories for hobbyists, see pictures.

VB 5EUR

Regensburg

Offer a little used Ratio IX3M Pro Reb because of hobby resolution The tech dive computer has only made 70 dives, it is suitable for rebreather diving and has countless extra functions. Among other things, it would be possible to analyze O2 with the additional adapter (not included). Included is the adapter for CCR Fischer Srtecker with which it is possible to read out 3 O2 sensors of a CCR. 800 Chf Vhb.

Derendingen Schweiz

Oxygen tank for Russian rebreather for sale.

2 separately lockable "batteries" with a volume of 0.12l each. Total 0.24l 150bar, oxygen pure, residual filling.

For hobbyists, the two very finely adjustable valves may be interesting.

VB10EUR

Regensburg

For sale is a Golem Gear BOV for the AP Inspiration. It can be connected directly to the T-pieces of the counter-lungs and dipped. Hardly dived, in excellent addition 460EUR incl. insured shipping to Germany

Mainz

For sale is a Sentinel BOV for the AP Inspiration. It can be connected directly to the T-pieces of the counter-lungs and dipped. The HUD holder is also suitable for the original inspiration HUD. Hardly dived, in excellent condition 480EUR incl. insured shipping to Germany.

Mainz

The rebreather offered here comes from a project where my goal was to build an m-CCR from a NITROX SCR. The system works, I was with the device a few times in the water dives up to 100min and 20m were problem-free.

The control of the O2 component is based on the KISS principle: O2 needle valve set to approx. 0.9l/min; manual addition of additional O2 via buttons; Diluent (air) via pulmonary automatic bypass AND also possible manually. The O2 -Sufe is specially adapted for the Constant-Flow needle valve - conversion part for Apek's first stage is incl. A ppO2 monitoring is also built-in - 2 separate sensors on 2 separate displays (are installed in one housing). The built-in belt corresponds to a DIR style.

ATTENTION: THE SYSTEM HAS NO APPROVALS OR CE!! USE IS AT YOUR OWN RISK! I ASSUME NO LIABILITY, WARRANTY OR GUARANTEE - PRIVATE SALE! THE SYSTEM IS SOLD AS A CRAFT PROJECT!

The system is passed WITHOUT false, first stages and finimeters.

The O2 monitoring (sensors are not included), as well as the conversion part for an APEKS first stage at constant medium pressure are included.

PRICE: 850.-, excl. shipping (shipping within the EU is possible)

Questions about the system, if possible, please send a message.

Neunkirchen / Österreich

1. High-quality lung machine complete set !

For detailed information, simply check with Cressi or ask me.

Consisting of:

+ 1st stage: Cressi T-10 Cromo

+ 2nd stage: Cressi Galaxy R

+ Octopus : Cressi Balanced MG

+ Dive console: Cressi Leonardo (computer)

(incl. compass and finimeter)

+ Inflator hose

+ Solenoid valve for the octopus

RRP: 975EUR (I would like to have 460 EUR)

Condition: Very good - from summer 2019

(Computer 36TG, equipment under 20TG)

Everything is completely prepared and ready to dive.

2. Cressi Commander Wing Jacket

RRP: 399EUR (I would like 200EUR)

Condition: Very good - from summer 2019

(Under 20TG)

Size: L

The wing has been treated very well and is freshly prepared. It can be dived directly.

All equipment offered here is from the Cressi Atelier series. These are the high-end products from Cressi that can only be bought in the dive shop!

Since I only dive rebreather, I have to part with a heavy heart.

(If you are interested in matching diving suits, fins etc. and accessories, please report!)

Total price for both: 660EUR VB

Retail sales are also possible!

Köln

A 2 year old Poseidon Seven Rebreather is offered in the original scope of delivery.

40 meters variant

First possession - Purchase invoice of Poseidon Germany is at

new service 19.02.2021

Private sale with the end of the statutory warranty

Rebreather works without problems, no defects, very good condition

Shipping possible - pick-up preferred

Price: 3590.-EUR

Norddeutschland

Moin,
I offer a functional original Dräger LAR V circulating diving device, a 100% oxygen rebreather.
All parts as shown.

The device is functional, and allows completely bubble-free diving.
It is non-magnetic and completely silent according to STANAG.


For international users:
You can buy an origional German CCR, a closed circuit rebreather, used by the German Navy and the US SEALS. (as the MK 25)
In original excellent condition, amagnetic and silent.


Warning: It is NOT a recreational diving device, has NO CE approval. Diving with pure oxygen requires extra training.
The device is therefore, although fully functional, only sold "to hobbyists", or as an exhibit. Likewise, ONLY the device incl. bottle is for sale, NOT the suit, the fins, the diver etc.


Shipping is of course possible for 10EUR.

International shipping possible against prepayment

Oldenburg

Sell SENTINEL Rebreather
Due to time constraints, I no longer regularly come to dive and will therefore sell my Sentinel.
He got an update - completely new electronic head with fiber optic technology, CO2 monitoring and conversion to Apek's controller.
So practically almost a new device. In addition, a 3L 300bar Diluent bottle and a Bailout bottle are included
(optionally 80cf or 40cf aluminium) many seals, replacement lung, lead, a box, a stainless steel stand and a
half backplate made of stainless steel. All bottles with valid TÜV.
The device needs new oxygen sensors and lime - otherwise, after filling the bottle, it is ready to dive. Course can be arranged. VB 5000EUR

Leipzig

I am selling the Sidemount SF2 eCCR rebreather that I purchased for a project in July 2019.It only has 19 dives. As new and with everything that comes standard. Ready to dive.

Low price. If you want information contact me.

If necessary, I can still send photos. The rebreather is in top condition. However, the Switshblock would need new valve seals. That's why I installed two new flow stop valves. I did the season (September 2020) with it in Hemmoor tX dives.

BOV is installed. DSV is also there. All seals as well as the drain valve from the inner counter-lung are new.

Also present:

D12 , multiple frames for different bottles, BOV, DSV, ARGON SET, Backplate ALU with harness by OMS, Wing OMS 94lbs

Everything in top condition

Some spare parts

Vb 3900EUR

Offer here a professional oxygen rebreather OXY GEM-11 Made by Kawasaki in the original transport case and all accessories. Everything is unused and in new condition! There are 2 x 5L carbon oxygen cylinders. One in the transport case and one in the device. These carbon bottles are particularly light. The rebreather has a full face mask. The container is filled with CO2-binding breathing lime. However, this should be replaced before use. Operation Manual is included. Shipping possible against assumption of costs. Pick-up preferred. Was intended as a craft object but nothing came of it.

Price 2000EUR.

Ludwigsfelde

Frame is made of V4AStahl and is seawater resistant.

Previously dipped with D7, D8, D10 and D12.

Price: 120 Euro

Kreis Borken

Because of hobby task I sell our rebreather.

This model of Rebreather has been taken as a template for the SF2 available on the market. It is therefore the predecessor model.
Visually, it is identical. The main difference is in the mind of the rebby and the operation. This will be explained in a moment.

This device has a simple shape and looks clear and compact.

This is due to the fact that the sensors are located in the tube.
The difference to the SF2 is due to the technology and handling. The SF2 is an eccr and this model is a mccr. The sensors of our rebreather are connected to the dive computer Shearwater Perdix (which is not included in the price). The dive computer takes over all the gas control and indicates when oxygen needs to be supplied. Another dive computer can also be connected here. The oxygen is supplied manually with an oxygen inflator.
The big advantage of this self-control and self-dosing is that you do not blindly rely on an automatic device. You always have your own control over your oxygen supply.

The assembly or disassembly of the rebreather is very easy, as the entire tube can be taken apart. All parts can be easily reached without unscrewing the accessories (1st stage / wing / plate / harness / bottles).

The electronics chamber is located inside the head. It is housed in the smallest of spaces, which reduces condensation in this area to almost zero.

The connectors of the breathing set are mounted slightly angled on the head, which contributes to an optimal positioning of the set and a pleasant wearing comfort.

The counter-lung is located in the lower tube. This leads to an ideal diving position in the water as well as low water resistance.

The lime container sits between the head and the centre piece.

The tanks are easy to assemble and just as easy to disassemble.

The rebreather has always been reliable and has worked flawlessly. It was well maintained. It is fully functional.

The Lieferumpfang includes:

• Rebreather, as described above with oxygen inflator and all mounted hoses

• DIRZONE Wing with Harness

• Travelframe

• 2 x 1st stage Apeks TEK3 with finimeter

• Price: 2.000 Euro

  
  When picking up, there is still a cardboard box of lime.

• In addition, the following can be purchased with extra charge:

• Shearwater Perdix (dive computer)

• 3-litre mono bottles

• BOV (Golem Gear) with folding hoses
  
  Since this is a private purchase, there is no guarantee and a return is not possible.

Kreis Borken

for Dräger RAY Rebreather or DOLPHIN

Adapter G 3/4 to M24x2, 20,-EUR

1 x DRÄGER-Nitrox double valve M24x2 70,-EUR

Rebreather Ports

2 x breathing tubes, each. approx. 80cm

Augsburg

Dräger Panorama Nova Dive, high quality OC/CC Full Face Mask with many accessories in very good condition (used < 20x ), ready to dive!

More or less the best full face mask money can buy.

Can be used with a rebreather with a optional (not included) rebreather bite-piece.

1x Dräger Panorama Nova Dive

2x TecMe P-Port adapter (solid delrin) for Apeks regulators + extra O-rings

2x Dräger First Stage

2x Dräger Shark Second stage (1x P-Port, 1x normal mouthpiece)

1x Clear Pilot Anti-Fogging Spray

1x Mask Box

The mask is excellent condition, the p-ports plug easily and also the 'window wipers' rotate very smooth.

The two Tecme p-port adapters allow you to use your own Apeks regulators and that makes this a really nice breathing mask. Also the p-port allows you to unplug your regulator and breath ambient air while swimming at the surface or when gearing up. You can also switch p-port regulators underwater if needed, just make sure to practice in a pool a few times.

The visor/window was replaced last year as I damaged the anti-fogging coating (~ 100 USD/EUR). Retail value in well above EUR 1500 / $ 1650.

Asking EUR 750 / $ 825, shipping from The Netherlands not included.

Sell a new Hollis EXPLORER rebreather (original price EUR 4950,00). Price: VB

P.S. Since private sale, no guarantee and no return!

Bayern

New diving compute used only once

Technical data:

Application: Tech and sport divers

Processor: Low-power Microchip PIC18F87K22

Datamemory: 4 MegaByte flash memory

Advertisement: IPS LCD monitor with ambient light sensor, viewing angle: 160°, resolution: 320 x 240 pixels, size: 2.4" (63mm diagonal screen)

Connections: Bluetooth Smart Ready (2.0 and 4.0)

Sensor: Combined pressure/temperature sensor, 3D compass (tilt-compensated)

Power supply: Lithium-ion battery (20 hrs running time/2 hr swell)

Controls: Two sensor buttons

Housing: Aluminum, milled from the full and hard-anodized. Scratch-resistant borosilicate glass pane

Operating depth: 120 meters

Dive computer is in good condition only slight traces of usage...

Pick-up would be possible ...
Shipping at extra cost...
If you have any questions, please do not hesitate to contact me...
Private sale, therefore no warranty or withdrawal, warranties ..

Price :700EUR

Is a Whitearrow circulatory device

Can be dipped as pscr or as m ccr everything is available

2x 8.5 l separated

2x 8.5 l with bridge

The counter-lung is the Nt 3 system new and the breathing tubes are cooper pants

If you have any questions, please contact us

Price 4500 EUR

Engen

Submatix CCR 100 SMS

Includes: - canister (4 hours autonomy) - 2x PPO2 displays; (1) Submatix Oxyscan 100-A, (2) VR2 Delta P Computer - wing included is: Buddy Redwing - maintenance tools included - can be sold without cylinders for courier purposes etc. Last used 4 years ago and will need to be serviced. It is your responsibility to ensure you are fully trained to use this rebreather. Buyer to pay for courier. Happy to answer any questions or send more pictures if required. Price : 1150 Euros

Poseidon Rebreather MKVI 2450th EUR and a Poseidon Seven 3650th-EUR for sale

Both devices have received a new service.

Sports battery, wing, bottles and the rest of the accessories are included

Norddeutschland

A PSCR RB80 clone is offered.

Made entirely of Delrin/POM.

Frame is powdered from Va and black. Clamps for attaching the bailout tanks are included, switch block complete except for the two QC6.

Loop consists of Cooper pants, cordura protection from Dräger and BOV Tres Presidentes ( identical Golem Shrimp )

Lots of spare parts and lungs almost new.

Shipping of the buyers, an education is needed!

VB EUR1500,-

München

-Used, undamaged,
-Complete with inflator hose,
-Bubble material: double-shelled, cordura (perfect for cave & wreck),
-Color: Black.
-Manufacturer: A.P.Valves, Cornwall, UK

Price: 119,-EUR

84489 Burghausen

Unused BOV from Poseidon. I had bought the BOV to convert another rebreather. But I never got to it. The BOV is therefore as good as new, as it has never been used.

Price 900EUR

-Original and as good as new,
-New generation (not the old type),
-stainless steel,
-with belt holder (new)
-with MD hose,
-with Swagelok QC6 female Connector
-with Swagelok QC6 male connector / 9/16 male
-with APEKS Free Flow Control (FCD)
-with adapter 3/8 fem-9/16 fem

-Perfect for quick conversion from SCR to mCCR.

Price: 349,-EUR

The sale is made to the exclusion of any material defects.
Liability for malice and intent as well as for damages for bodily injury as well as for gross negligence or intent remains unaffected.

84489 Burghausen

Hello, because of the abandonment of diving I offer here my

SF-2 rebreather in full equipment "Ready to Dive +".

Included is the following:

SF-2 ECCR tube approx. 60 h dive time incl. Shearwater Controller DiveCAN

Shearwater Petrel with Fischer connector as backup computer

Backplate long and heavy (6 mm)

Wing Black Devil

1st stage Scubaforce oxygen side

Stage 1 Scubaforce Diluent

Manual ADS metal version over the shoulder

Golem Gear BOV with Breathing Snake

Original DSV with long spare hoses Dräger

2 x pair of 3l bottle set 300 bar.

Original suitcase from Scubaforce is also included.

Pictures can be emailed via PM and serious interest.

The device has traces of use from cave diving but is technically in a

perfect condition, the oxygen sensors are about 1 year old but still have

acceptable values.

VB 7900,-- Euro

Düsseldorf

• ·         backmounted counterlungs (BMCLs
• ·         AD
• ·         Tempstic
• ·         BOV (bailout valve)
• ·         Trimix Software
• ·22KG win
• ·         XL harness (Fits me with 182cm and 85Kg
• ·         ALIBOX / Travelframe from Aluminu
• ·         Data cathe
• ·         Delrin lid for the lime container (to store lime between the TG
• ·         2 O2 and 2 Diluent 3 liter bottle
• ·         New replacement AP16 O2 Senso
• ·         3 working/good AP16 O2 sensors installed (all also within the best before life)

Inclusive:

• ·         frontmounted counterlungs (FMCLs) and harness with lead pocket
• (Have quick-release fasteners installed for easier cleaning
• ·         Original housing (small crack in the floor, but it does not bother further and has been there for at least 8 years
• ·         Auto Air
• ·         2l 300 bar buoyancing gas cylinder incl. quick connector and Scubapro MK16 or MK25 first stage.

If desired, I can convert to original housing, Auto Air and FMCLs.

Do not sell individual parts of the rebreather, but it would be OK without Auto Air, FMCLs or BMCLs and without ALIBOX or original housing.

VB 3600EUR including shipping. Pick-up possible in 35428 Langgöns

Hello everyone

I sell a Hollis Prism2 in very good condition with various accessories.
what's in it?
- Hollis Prism2 complete with 2x 3l steel bottles (black, O2 with nitrox thread).

Additional:
- Hollis Prism BOV
- Stainless steel stand
- small counter-lungs
- all medium pressure hoses exchanged for flex hoses
- new high-pressure hoses
- various spare parts (O-rings etc.)
- Custom-made HUD holder for the "normal" mouthpiece (not BOV)
- 4x originally packaged O2 sensors

Price 5399EUR VHB

Schüpfen