Classified ads Backplate

Offer my Halcyon Titanium knife

VB 90EUR plus 5EUR shipping

Attention! I also sell the matching Halcyon backplate with complete DIR strapping here. A total price is therefore possible!

Private sale, no return, no guarantee

NRW

Offer my well-preserved Halcyon stainless steel backplate with complete DIR strapping and D-rings. Weight in total approx. 3 kg, dimensions see photos.

VB 240EUR plus 6EUR shipping

Attention! I also sell here the matching DIR double device 8.5l and Tecline wing as well as lead system. A total price is therefore possible!

Private sale, no return, no guarantee

NRW

I offer my well-preserved because little dipped TECLINE Wing Donut 17 Special Edition. As you can see from the pictures, it is in good condition. It was treated with care and only dipped in fresh water.

With a buoyancy volume of 17 liters, it is ideal for D7, D 8.5 and D10

VB 340EUR plus 5EUR shipping

Attention! I also sell here the matching DIR double device 8.5l, backplate with harness and lead system. A total price is therefore possible!

Private sale, no return, no guarantee

NRW

We are selling our Scubaforce Wing Jackets because of new acquisitions. Purchased in 2020. Only freshwater submerged. Well maintained and in very good condition. Revision is recommended.

Wing 1 consists of:

Black Devil Wing 32 lbs

Cobra Harness Comfort

Single Tank Adapter incl. Combands

Black Devil Backplate

Blade Soft Pad (back pocket)

Soft Tank Band

550,- Euro VB

Wing 2 consists of:

Scubaforce Black Devil Wing 32 lbs

Cobra Harness Comfort

Single Tank Adapter incl. Combands

Standard Steel Backplate

Blade Soft Pad (back pocket)

Soft Tank Band

500,- Euro VB

The wings are of course to be sold individually.

Also for sale individually:

3 weight pockets for waist belt - 30,- Euro

1x P-lead 4 kg - 40,- Euro

1x P-lead 2 kg - 20,- Euro

Duisburg

I am selling my original storage pack from Hollis including the necessary stainless steel screws. The condition is very good.

The pad is made of robust and durable nylon with sewn-on edge tape. I've always worn it on a Hollis backplate, but it should also fit on other backplates.

Price: 50,00 Euro
PayPal and shipping (DHL) are possible.

This is a private sale without warranty and return.

49661 Cloppenburg (Niedersachsen)

Buoyancy bu
max. 2 x 20 ltr or 1 x 20 ltr.
Hardly used - like new

Price: VHS

Phone: 0170 570 39 09

Wrestedt

I offer a new BTS Argon Straps. With these Argon Straps from BTS, the argon bottles can be attached to the backplate.

BtS Argon Mounting Straps (Backplate), bottles up to 90mm

- For attaching argon bottles up to 90 mm in diameter to the backplate

-Velcro

- Anti-slip pad, for secure fixation of the bottles

-Scope of delivery:

1x BtS Argon Mounting Straps (1 pair)

2x BtS Anti-Slip Pad

2x Bts Screw Set

From animal-free non-smoking households

Retail price 45,00 Euro plus shipping costs approx. 6,00 Euro.

Payment PayPal "Friends and Family".

This is a private sale under EU law, not a guarantee/return and warranty.

Bielefeld

EUR 620

Hello
I sell from Halcyon an aluminum backplate with RCA system harness, Eclipse 40 wing, weight pockets, back pads and single-tank adapter. I haven't used the set for a long time, so the inflator should be revised.
For shipping within Germany, I take over the shipping costs.
Since this is a private sale, I exclude guarantee, return, revocation and warranty.
PayPal is not possible.
Best regards,
Scott

München

I offer: Scubaforce backplate with Halcyon harness incl. dirzone knife.

Total weight: 2.3 kg

Condition: Very good, used condition

Price: 220 EUR VB

* Heser Backplate stainless steel 3.3 kg standard

* including harness + trim weight pockets and belt buckle

* Top condition

* PayPal possible - self-collection (Sigmaringen district) or shipping possible

* All complete 248,- Euro / with shipping + shipping fees

* Private sale

Riedlingen

V4 Tec Backplate

- Stainless steel, 3 mm

- Weight approx. 2.7 kg

- without harness

V4 Tec Single Tank Adapter

- without the bottle straps shown

- Material: polished stainless steel

- Weight approx. 0.8 kg

V4 Tec lead system for the original V4 Tec Single Tank Adapter

- 2 x lead weight with approx. 3 kg each

- 2 x mounting plates

- a total of 4 mounting screws

ATTENTION: only usable for the here with angbetinen V4 TEC Single Tank Adapter

This is a private sale. There is no warranty / no guarantee, return excluded.

Only self-collection, due to the volume and the own weight I do not make shipping. Only cash payment directly on site.

64297 Darmstadt

I sell my SF 2 prototype MCCR here.

This is a prototype. It was one of the few predecessors of the current SF2 with a special head which was not glued but sealed with additional O-rings.

The rebreather is in good condition, ready to dive, absolutely tight and fully functional. The sensors have been replaced in the last 2 months. In addition, 3 more oxygen sensors in their original packaging are added. The rebreather is sold with a Shearwater Predator and is therefore ready to dive.

All hoses have been replaced by MiFlex hoses. As well as all O-rings and small parts replaced.

The rebreather has a CMF (Constant Mass Flow) from TecMe on the oxygen side which is fixed to a flow of 0.5 L per minute. In addition, a Manuel Gas Add from TecMe was installed on the Dilluent side for security reasons.

The BOV is from Golem Gear Shrimp which not only closes the rebreather.

The first two stages are APEKS Tek 3 oxygen-pure.

On the backplate are mounted 2 bungee ropes and a buttplate for carrying the stage bottles. As a result, the stage bottles come further back and you have more armroom

Nautec valves are installed on the 3 liter compressed air cylinders and still have TÜV until 01/23.

Accessories such as O-rings and batteries for the dive computer are part of the offer.

Price: 2400 EUR VB

Pick up only!

It is a private sale without guarantee, warranty or possibility of return.

The sale takes place under exclusion of any liability for material defects.

450EUR shipping possible

Features of the HYDROS PRO
- Resistant: Gel harness made of patented injection-molded Monprene® is highly resistant to UV radiation, chemicals and abrasion. Velcro and zippers are completely dispensed with
- Immediately dry: Hardly stores water, light and dry after diving - ideal for travel
- Modular design / "BC-4-Life": add weights, straps and bags and much more as needed
- Easy to repair: virtually any component, including buckles, can be replaced without sewing
- Ergonomic 3D design: adapts to the diver's body shape for maximum comfort; Body grip gel prevents the jacket from shifting or slipping up
- Torso-Flex-Zone: Automatic adjustment to the back length of the diver for excellent comfort and freedom of movement
- Two-component backplate: Provides maximum stability and comfort
- The strap system for a mono bottle allows easy installation
- Articulated shoulder straps: This allows the straps to adapt to the body shape and thus ensure a precise fit
- Lightweight: Modern material ensures low weight
- Neutral buoyancy: The HYDROS PRO has virtually no lift
- Cross-flow channel: Reduces air pockets for improved maneuverability and easier drainage from any body position
- 2-stage inflating: A three-piece bungee strap system controls air distribution to ensure a compact shape underwater and high lifting capacity on the surface
- Weight system: Simple, safe and reliable quick-release buckles provide a fixed position for easy, one-handed operation
- Multi-mount matrix: Multiple attachment points and D-rings, for secure attachment of accessories
- Intelligent package design: shoulder and chest straps can be folded into the air bubble, making for a very compact package for easy transport and storage

Hello
I sell my SCUBAPRO HYDROS PRO Jacket because of the switch to Sidemo. The jacket is in top condition! The Jecket has the size – M –. It delivers what is shown in the photo (overview). Shipping within Germany is possible (costs are borne by the buyer). Pick-up in the Hanover region is also possible.
Price VB 430 EUR.

Here are the technical specifications according to the manufacturer:

• Resistant: Gel harness made of patented, injection-molded monprene, extremely resistant to UV radiation, chemicals and abrasion, complete renunciation of Velcro and zippers
• Instant drying: Light and dry right after the dive - ideal for travel
• Modular Design/"BC-4-Life": Configure "your" jacket with weights, straps, bags and much more
• Easy to repair: Virtually any component can be replaced without sewing work
• Ergonomic 3D design: Adapts to the body shape of the diver for maximum comfort; Body Grip Gel prevents shifting or slipping up
• Torso-Flex Zone: Automatic adjustment to back length for high comfort and freedom of movement
• Two-component backplate: Maximum stability and comfort. Simple belt system for the safe installation of a mono bottle.
• Articulated shoulder straps: Perfect fit to body shape and precise fit
• Lightweight: Modern material ensures low weight ◊ Neutral buoyancy: The HYDROS PRO has virtually no buoyancy
• Cross-flow duct: Reduces air pockets for improved maneuverability and easier venting of air from any body position
• 2-stage inflating: A three-piece bungee strap system controls air distribution within the air bubble to ensure a compact shape underwater and high buoyancy on the surface ◊ Weight system: Simple and reliable quick-release buckles for simple, one-handed operation
• Multi-mount matrix: Multiple attachment points and D-rings, for secure attachment of accessories ◊ Intelligent package design: Shoulder and chest straps are folded into the air bubble, forming a very compact package for transport and storage
• Not suitable for use with dual unit
• With BPI & Faltenschlau

Garbsen

Offer jjccr backplate with straps. Brand-new. 150EUR

Scubapro X-Tek Pro Xtreme System 27kg Buoyancy - Horseshoe Wing in North Rhine-Westphalia - Tight | eBay Classifieds (ebay-kleinanzeigen.de)

1 year old. No 20 TG. Due to permanent switch to sidemount. This wing is no longer available. Original price was 900EUR. Maximum reliability due to the redundant bubble. In addition, perfect water location.

- Large horseshoe wings with a buoyancy capacity of 27 kg - ideal for dives with double device
- Double, redundant inner bubbles made of 420 Denier Nylon, protected by an outer shell made of 1680 Denier Ballistic Nylon
- Precise buoyancy with balanced power inflation (BPI)
- Stable 50 mm Pro-TEK strap
- Better grip and comfort thanks to padded shoulder straps
- Quick release buckle on the left shoulder side for easy removal
- 50 mm stride strap with two stainless steel D-rings
- The stainless steel backplate ensures optimal stability during longer dives
- Shoulder straps with two D-rings on each side
- Internal storage compartment for signal buoys or lifting bags

Shipping possible against assumption of costs. Since this is a private sale, the sale is made to the exclusion of any guarantee or warranty.

Enger

I only sell the equipment completely!

For inquiries please relalistic offers.

Trilaminate Dry Suit Northern Diver Aquarius Size XXL new and unused. Cuffs are not trimmed, with Arpex valve!

The Wickelzip allows you to put on and take off the Trockis from Northern Diver (Aqualung) independently. One of the few Trockis on the market that can be dressed without outside help. And all this at a great price! Technical characteristics of the Northern Diver Aquarius

"Ultra-light"Dry suit with front entry

Breathable and robust

Attract without outside help - thanks to front entrance

Neoprene heat sleeve on the neck

Cargo Pocket

4mm neoprene boots for warm feet

Suspenders for a better fit

Kevlar reinforcement on the buttocks

Kevlar reinforcement at the knees

Reflector strips on shoulders and arms

Leg pocket

In a set with hood, care set and transport bag

Northern Diver Glove System Dry Glove new and unused, size XL,

NothernDiver Dryglove System with Safelock. Finally a complete dry diving glove set which really works and can be mounted within minutes! All necessary mounting parts are included in the set - including instruction DVD! Even a neoprene sealing glue, if you have laminated neoprene cuffs is available!

Technical details:

Revolutionary closure for quick opening/closing without outside help!

2 sets of spacer rings included (flat rings for neoprene cuffs, high rings for latex sleeves)

Sturdy PVC gloves with a slightly rough surface

Acid-resistant gloves

Separate inner gloves (perfect for cleaning)

Mounting tools included! (Loosens systems that are tightened too tightly)

CE approved

TEMPERATURE RANGE: 0°C - 13°C

Package includes:

2 PVC gloves

2 separate fleece inner gloves

2 sets of spacer rings

1 assembly tool

1 sealing glue with brush

1 Instruction manual on DVD

Seemann Subtech 100 Underwear XXL for dry suits Innovative underwear made of 3 layers of material, which is suitable for both neoprene and neoprene

Trilaminate dry suits is suitable. The outer layer of material made of water-repellent polyester fabric ensures comfort and durability as well as easy slippage. The lining

made of soft DOUBLE FLEECE transports moisture away from the skin and gives

comfortable thermal insulation. The polyester inner lining provides additional thermal insulation.

Easy to put on and take off with arm cuffs made of 2mm SCS neoprene. The anatomical

cut ankle cuffs made of 1.5 mm Glideskin allow easy sliding in

in suit and booties. The quilted seams prevent the materials from slipping when attaching and

Undress. Other features: 2 large hip pockets and chest pocket with zipper, integrated thumb loops, wrist loops, resistant spiral zipper, from above and

bottom to open, elastic waist.

Diving tanks

The double jaw consists of 2 x 7 liter steel bottles 300bar,wide bridge distance, identical to D-12, double unit is equipped with the well proven V4tec stainless steel precision clamp sets (V4 steel) and with TÜV.

Scubapro 10 liters with stand used,

2 litre bottle used,

Argon Mono Aluminium Tarrier gas cylinder 0.85 litres 200 bar

Unused with argon straps,

The Deepstop-Apeks DIR Set DS4 consists of:

Right side:

The Apeks DS4 1st stage DIN, DIN G5/8" air connection with metal handwheel and protective cap

210cm 3/8" medium pressure hose black with XTX50 2nd stage, black,

a small carabiner hook with caveline attached,

Left:

The Apeks DS4 1st level DIN

a 56cm high pressure hose with deepstop mineral pressure gauge and 1" a

60cm backup hose with the Apeks XTX50 2nd step and Bunjeeloop,

each in black.

Regulator pocket

Mk10 1st stage with...

Complete set wing

Bubble 40 lb Dive System Original price: 385 Euro
Harness Hollies HTS SM Original price: 359 Euro
Backplate stainless steel manufacturer unknown Original price: 100-200 Euro
Lead bags approx. 50 Euro

Original price between 850 and 950 Euro!!

VB 350 EUR

For sale is a used standard Halcyon backplate for 170EUR with complete harness. Weight incl. harness approx. 2,9kg. Condition used with very few traces of use.

The backplate can be picked up or shipped to DE against DHL reimbursement (6EUR). International shipping is also possible after consultation.

Sale of private, no return or guarantee.

Offer here a used backplate from Heser. The original price is 220EUR. For 130 Euros (VB) I would sell them. Heser backplates are genuine quality products made in Germany.

With the weight and length of the backplate, it is good for smaller people under 170 cm people. Due to the weight, no additional P-weight or similar is required.

Here are some information from the manufacturer:

A short backplate offers the advantage for people with a height of less than 170cm that you have a little more leeway when tuning the position on the back. As a result, a more favorable position can often be found on the back, so that under certain circumstances the achievement of a horizontal water position is facilitated.

This backplate is of outstanding quality. In contrast to conventional backplates, all edges are provided with a milled radius. This protects the webbing in the best possible way. Due to its excellent workmanship, the backplate has a very nice look.

Properties:

Backplate material: 6mm, approx. 3.6kg seawater resistant stainless steel (1.4571 ; 316Ti)
Surface: Matt (blasted with precious corundum)
Dimensions: length = 357mm (23mm shorter than standard backplates); Width = approx. 240mm (40mm narrower than standard backplates)
Hole spacing: 11 inches = 279.4 mm (Fits any wing with the standard hole spacing 11 inches)

Private sale, therefore no return or warranty.

Tübingen

I am looking for a stainless steel backplate incl. harness.

Price VB

Please offer everything.

DIR Zone Backplate including banding

Complete set consisting of:
- Stainless steel backplate 3mm with harness,
- stainless steel D-rings and belt stoppers,
- stainless steel belt buckle,
- crotch belt and
- Small, handy knife made of stainless steel with sawtooth
- Incl. knife sheath made of webbing for the abdominal belt

Weight: approx. 2.8 kg

Price incl. shipping: 110EUR

No flaws.
You can make me an offer.
Private sale. No guarantee or withdrawal.
Animal-free non-smoking household.

for questions: 0172 8128721

Herzogenaurach

Backplate of overstock and never used. Fits all wings with standard hole spacing 11".

The backplate for 30,-EUR is delivered as shown. Payment via PayPal and shipping is possible. I offer more items, so that you can save shipping costs if necessary.

Greeting from Berlin

Alex

Berlin

Backplate of overstock and never used. Fits all wings with standard hole spacing 11". As with Heeser, the edges are beautifully deburred and rounded to reduce the stress of the harness.

The backplate for 50,-EUR is delivered as shown. Payment via PayPal and shipping is possible. I offer more items, so that you can save shipping costs if necessary.

Greeting from Berlin

Alex

Berlin

Offer here a used Halcyon Storage Pack incl. the 6 matching screws for the backplate.

price 40EUR + shipping

Sell SENTINEL Rebreather
Due to time constraints, I no longer regularly come to dive and will therefore sell my Sentinel.
He got an update - completely new electronic head with fiber optic technology, CO2 monitoring and conversion to Apek's controller.
So practically almost a new device. In addition, a 3L 300bar Diluent bottle and a Bailout bottle are included
(optionally 80cf or 40cf aluminium) many seals, replacement lung, lead, a box, a stainless steel stand and a
half backplate made of stainless steel. All bottles with valid TÜV.
The device needs new oxygen sensors and lime - otherwise, after filling the bottle, it is ready to dive. Course can be arranged. VB 5000EUR

Leipzig

Sell Halcyon stainless steel backplate with harness (shortened) and stainless steel small parts, as well as Halcyon belt buckle and rubber rings. Very well preserved and maintained.

The Halcyon backplate - the original - often copied, but unsurpassed in quality and functionality.

Technical data of the Halcyon standard backplate made of stainless steel:
- Weight: Approx. 2.72 kg (6 lbs)
- Height: approx. 39.3 cm
- Width: approx. 26.0 cm
- Hole spacing: 280 mm

Halcyon Harness ("Bebänderung") consisting of:
- approx. 5 cm wide Halcyon webbing (with blue Halcyon logo)
- 2x shoulder D-ring, 1x hip D-ring made of stainless steel
- Rubber rings (to secure the accessories, e.B. backup lamp)
- Soft crotch strap with two stainless steel D-rings
- Halcyon stainless steel belt buckle
- Subgear belt buckle to secure the tank lamp

PayPal possible. Pick up in 76709 Kronau or at the lakes in the Mannheim, Heidelberg, Karlsruhe area. Shipping only as DHL parcel with tracking (min. 5 Euro), except at the express request of the buyer.

Original price: 290,- EUR. VHB 240,- EUR plus shipping costs.

Kronau

We clean up and need space for new 😊

Therefore, some various diving items are for sale. PayPal possible. Pick up in 76709 Kronau or at the lakes in the Mannheim, Heidelberg, Karlsruhe area. Shipping only as DHL parcel with tracking (min. 5 Euro), except at the express request of the buyer. Prices plus shipping costs.

• Check-up dry diving gloves. Once size M, once size L. Fed from the inside. Without underwear gloves. VHB 75 EUR per pair
• Storage packs for backplate. 1x Halcyon H2O special edition, 1x DIR zone black. Without screws. VHB 26 EUR per pack.
• DIR-Zone belt bag for harness (50mm). VHB 30 EUR
• Oceanic gloves and Mares hood, both 5mm. Size L. VHB 5 EUR each
• Crotch strap, no-name. Standard unabridged. VHB 10 EUR
• Subgear lead belt 1x new and 1x used. VHB 5 EUR
• Various medium-pressure hoses. Miflex, rubber, inflator, regulator... Please inquire. Price VHB
• Rubber mask band with neoprene schoener from TUSA. VHB 2 EUR
• Cold protection cuff for the arm of S.L. Dive. 3.5 mm neoprene. 2-piece: black with smooth skin neoprene, size L and neon yellow, size XL. VHB 15 EUR
• Lead stopper and 2x fixed D-ring on lead stopper. VHB 2 EUR per piece

Kronau

The backplate is unused and has never been in the water

75EUR

backplate 6mm 5500g. Used but top

175EUR

If necessary, I can still send photos. The rebreather is in top condition. However, the Switshblock would need new valve seals. That's why I installed two new flow stop valves. I did the season (September 2020) with it in Hemmoor tX dives.

BOV is installed. DSV is also there. All seals as well as the drain valve from the inner counter-lung are new.

Also present:

D12 , multiple frames for different bottles, BOV, DSV, ARGON SET, Backplate ALU with harness by OMS, Wing OMS 94lbs

Everything in top condition

Some spare parts

Vb 3900EUR

The comfort of a backplate even when diving indoors?

Or with other TGs with a mono bottle?

This system offers just that, with a plastic backplate and mono bottle holder

Absolutely recommended to enjoy the free front even when mono diving.
Four lead pockets are part of the backplate (I add 4 kg of lead)

350 EUR

Tönisvorst / NRW

Hello

I sell here my Mares Dragon SLS Jacket in size S.
The jacket is now about 3/4 year old and has about 30Tgs exclusively in fresh water.
I only sell it because I want to switch to backplate/wing.
I also give a lead bag as a replacement and of course the bill.

Price is 210EUR vhb.

Just write for questions.

Chemnitz

Sell here a very well preserved Scubapro X-TEK Wing with "disposable" lead bags and a monotank adapter.

So both double devices and mono bottles can be mounted. It also has a stainless steel backplate.

The wing has a buoyancy of 27kg

X-TEK NP: 690,00EUR Jacket without adapter and lead pockets

Monotank adapter NP: 135,00EUR

Lead bags NP: 119,00EUR

An extended tape would be mounted on the left quick drain, as seen in the photos.

Sold on the basis of sidemount diving.

Price:599EUR

Shipping possible.

New aluminium backplate 4mm, 475mm long

all edges rounded, black anodized

Price 125EUR incl. shipping in Germany

Riedlingen

For sale is a D7 with harness, backplate & wing - so a complete setup.

Wing and Harness are from DiveRite!

--> 399EUR complete

Schüpfen

Look for such a backplate made of Kydex from the US brand Deal Des Supply.

For sale is a Seac Icaro Tech Wing Jacket. The bladder is absolutely dense. The inflator was revised last year. Quick outlets work.

I can't say anything exact about age, as I bought the jacket used myself. However, it is the first model that was launched on the market in 2007.

Retail Price: 120EUR

The jacket was dived by me until recently and is only sold because of switching to another system (backplate + donut wing), as it becomes more "technical" with me.

The following changes have been made by me:

- Replacement of the inflator hose with a shorter

- Original harness has been exchanged for a DIR harness with crotch strap

- Bungee to limit the bladder has been removed

Lead pockets and inner bleaches are included, whereby the inner bleaches are damaged which is not a problem.

The Wing is ideal for diving with D12/D8,5/D7 and has the typical Wing Jacket good water position. The bubble has a buoyancy of 25Kg and can easily lift a D12 with one to two stages.

If there are still questions, just ask :).

It is a private sale, I do not assume any warranty. Shipping is possible if costs are covered.

Halle (Saale)

Set consists of the following components:

- Donut bubble mono bottle 10Kg

- 3 mm backplate aluminium

- Standard Harness

- Bottle strap

- Bottle adapter

- Deluxe upholstery

Set has about 35 dives.

If you have any questions, please do not hesitate to contact me.

Price 409,00EUR VB

Shipping is possible

Private sale. No exchange or return. No guarantee.

Bayern

I sell some of my diving equipment here because I switched to Trocki with D12 and backplate.

To estimate the sizes I am 178 cm tall weigh about 65 kg and have:e shoe size 41.

For sale are:

• 7mm semi-dry suit Cressi Lontra Lady M/3 _ max. 20 dives: 70EUR
• Wing Jacket Zeagle Zena S/M incl. lead bags _ only 9 dives, very good condition: 350EUR
• Equipment fins Mares Volo Power in Small + new, unmerged Springstraps in S: 65EUR
• 6,5mm neoprene gloves Mares waterstop: 15EUR
• 6,5mm neoprene head hood Mares Trihood in XL (smaller): 15EUR
• 6,5mm neoprene feet in size 42 Aqualung: 15EUR

All prices negotiate base - together 500 EUR.

Inspection and fitting is possible in Minden, shipping against assumption of shipping costs also no problem. Return or warranty excluded. PayPal any fees for this are borne by the buyer.

Minden

Sell new

TECLINE Stainless Steel - Backplate 3mm with TECLINE DIR Harness

As shown in the pictures.

Has never been used or assembled.

It can also be shipped.

If you have any questions, please contact me at 0049 0162 962 39 57. Gladly also WhatsApp.

Price: 120,00 EUR

Pfarrkirchen - Bayern

I sell a jacket OMS Comfort Harness, backplate, strap bladder 45 L in color black, double 7 (Tüv has expired), device for argon bottle, argon bottle with connection and various accessories (lead bags, device for a bottle, buoys). Price 550 Euro negotiation basis!

Solingen

Offer 1L steel diving tank for 80EUR . Valve (G5/8) , year 2017, with TÜV until 05.2020. Ideal for use as a Poni bottle with buoyancing gas for Trocki. Always stored under pressure. Shipping Printless possible, shipping pays buyer (e.B. Hermes 4,95EUR). 2 straps from BTS for mounting on backplate I give with it.

Berlin

I have to clear out the leftovers and give away used, partly new or new diving things cheaply. (Shipping to Germany or EU will be added in each case). More photos are welcome. Unfortunately could only upload 10 pictures.

1. Apnea fins Cressi Gara 3000, Grey/ Black, Size 40-41, EUR45

2. Equipment fins Mares Avanti Quattro ABS, Black, Gr. Regular, EUR40

3. Dolphin Fins, Yellow, Gr.M-L, EUR20

4. Neoprene Shorty, approx. 6mm for the tropics or swimming pool, Gr.M, AS NEW, EUR20

5. Wetsuit Dolphin, approx. 6mm, size.M/L, EUR25

6. Wetsuit Sailor, approx. 6mm, Gr.M/L, EUR30

7. Div. temples for trocki, jacket, wetsuits, each EUR5

8. Brackets for compass, bottomtimer, dive computer, each EUR5

9. Neoprene gloves Mares, 3/5mm, EUR10

10. Neoprene gloves Scubapro Everflex, Size L, NEW, EUR30

11. 3 finger neoprene gloves, GNT, very warm, patched but tight, size L, EUR5

12. Underwear Neoprene Gloves Forth Element, thin, approx. 2mm, NEW, EUR15

13. Trocki Gloves BTS, Northern Blue, Gr.M, EUR15

14. Thermosocks for Trocki, Fourth Element, Size L, Approx. 43-45, EUR15

15. Wetnotes, Dir Zone with Boltsnap, EUR15

16. Wetnotes, Techline with Boltsnap, EUR15

17. Neoprene Hood Waterproof, 7mm, short collar, EUR20

18. Neoprene Hood Waterproof, 7mm, Longer Collar, LIKE NEW, EUR35

19. Neoprene Hood No Name, 5mm, Size L, NEW, EUR5

20. Neoprene Hood Dive System, 6mm, Size L, NEW, EUR20

21. Neoprene Hood SANTI, 6mm, Size XXL, LIKE NEW, EUR35

22. Neoprene Hood SANTI, 9mm, Size XL, LIKE NEW, EUR40

23. Neoprene Hood SANTI, 9mm, Size XXL, AS NEW, EUR40

24. Octopus rubber for backup controller, yellow, NEW, EUR5

25. Bag Dive System for Trocki or Underwear, AS NEW, EUR15

26. Halcyon Storage Pack for Backplate, EUR30

27. Knife yellow with lock system, AS NEW, EUR15

28. Reef hook, AS NEW, EUR5

Marktbreit

OMS Complete Set Performance Double

60lbs + OMS Comfort Harness XL + OMS Backplate V4A + OMS Lead Bags

This Complete Set is NEW and has not been USED NEVER due to lack of Time.

Sale Price: 499 EUROS

New Price is €599

No Guarantee and Withdrawal possible, as Private Sale

Hamburg

Because of hobby task I sell various equipment:

* Apekx WTX Wing 27 liters - good condition. FP 120EUR

* Apekx backplate with harness. I subsequently had a quick-release fastener installed on the left chest strap to make it easier to take off the wing in the water. The closure alone cost me 130EUR at that time. FP 175EUR

* Argon bottle 0.85l with DirZone straps, firmly mounted on the backplate. FP 80EUR

If you want to have everything together, you can get it for 360EUR

Good air

Wesel Rheinland

Sell my upstream backplate 6mm long. This is about 7kg heavy. Price: 160EUR

The Tecline Wing Donut 22 Special Edition is especially suitable for double-12. Mounted is a 35cm and in addition a 30cm inflator hose is included. Wing has hardly any traces of use and is dense. Price: 250EUR

Shipping is possible. The items can be purchased individually or together.

Region Stuttgart

-Used, undamaged,
-Complete with inflator hose,
-Bubble material: double-shelled, cordura (perfect for cave & wreck),
-Color: Black.
-Manufacturer: A.P.Valves, Cornwall, UK

Price: 119,-EUR

84489 Burghausen

Hello, because of the abandonment of diving I offer here my

SF-2 rebreather in full equipment "Ready to Dive +".

Included is the following:

SF-2 ECCR tube approx. 60 h dive time incl. Shearwater Controller DiveCAN

Shearwater Petrel with Fischer connector as backup computer

Backplate long and heavy (6 mm)

Wing Black Devil

1st stage Scubaforce oxygen side

Stage 1 Scubaforce Diluent

Manual ADS metal version over the shoulder

Golem Gear BOV with Breathing Snake

Original DSV with long spare hoses Dräger

2 x pair of 3l bottle set 300 bar.

Original suitcase from Scubaforce is also included.

Pictures can be emailed via PM and serious interest.

The device has traces of use from cave diving but is technically in a

perfect condition, the oxygen sensors are about 1 year old but still have

acceptable values.

VB 7900,-- Euro

Düsseldorf

Freiburg im Breisgau